DM-Fuel version
DM-Fuel is water and petroleum blended on a sub-micron level. This mixing of fuel oils and water creates a new fuel product that is called emulsified fuel, which we call DM-Fuel.
In basic terms DM-Fuel is an emulsion of 80% fuel and 20% water, yielding a 100% new fuel that exceeds all EPA emission regulations. DM-Fuel cost less than 20% of the same quantity of preprocessed fuel. The fuel is 95% - 107% more efficient than the preprocessed oil, and emits 20% less emissions too (dust, ash, NOx, CO, CO2 and SOx at 40%).
DM-Fuel is a stable homogeneous mixture of fuel and water with a stabilizing additive. DM-Fuel will remain stable for one year under normal temperature conditions. This fuel does not require stirring to maintain the emulsion. DM-Fuel emulsions will be marketed for transportation diesel fuel, bio-diesel, and power generation (combustion turbines, boilers) applications.
An oil treatment and remedial version
The New-Fuel process is being utilized in Japan by Toyota and Nissan for waste oil reclamation. Which is used in industrial furnaces. The Taiin Light Creating Co., Ltd., also is utililizing our technology for power generation systems, as well as the described maritime applications.
In these applications New-Fuel process has demonstrated a 40% reduction in cost of fuel; 20% reduction in emissions with the parallel cost reductions for maintenance requirements due to ash, dust, and cleaner fuel filters.
This technology is not limited to only fresh new fuel but to contaminated waste oil, bunker oil, and used cooking oils.
This technology will revolutionize the efficiency of our fuel in the world!
Company
highlights
The challenge of an economy driven by the need to reduce the demand for fossil fuels.
